Tidal

 


Downloads


  LinkTenn 32

 

Developed by Tidal Engineering for use with Tenney Environmental test chambers, the LinkTenn 32 provides remote monitor and control of multiple chambers from a single PC using the familiar Windows interface. The LinkTenn 32 is available in the free Monitor-only Mode.  The Monitor-only Mode does not allow remote control of your chambers, it only monitors and reports the current chamber conditions.  Additionally, you can create chamber profiles, but cannot download them, logging is limited to 6,500 records, and the alert system will display alarms, but will neither email nor fax them. The LinkTenn 32 Revision History text file contains a list of features added to each version of the LinkTenn32. Contact Thermal Product Solutions or Tidal Engineering to purchase a dongle to enable Full Featured Mode. 


Version 1.42.00 For Windows XP, Windows 7, Windows 8.1 and Windows 10 (Current Version)

LinkTenn32_V1_42_00_Setup.zip (74M)


Version 1.31.01 For Windows 7 and Windows XP (Prior Version)
LinkTenn32_V1_31_01_Setup_for_Vista.zip (58M)
LinkTenn32 Installation Notes for Win7


Version 1.30.21 For Windows XP (Prior Version)
LinkTenn32V1_30_21_Setup.zip (77M)


  TCWeb Data Logger  
A free PC based data logging and reporting application for use with one or more TCWebs.


Version 2.2.0
TCWebDataLoggerV2.2Setup.zip (13M)


  TCWeb Simulator  
The TCWeb Simulator is a software simulation of the TCweb system. Useful for demonstrating the TCweb Data Logger software and for training and testing in hypothetical situations, before interacting directly with the real TCweb hardware.
;


Version 1.1.0
TCWebSimulatorV1.1.0Setup.zip (4M)


  SimpleComm  
The SimpleComm application is a free all in one communications package designed to communicate with Synergy and VersaTenn V environmental test chamber controllers. It provides a simple remote interface for sending and receiving commands over: RS-485, RS-232, IEEE 488 and TCP/IP. SimpleComm also serves as a controller configuration utility that can help you manage your controllers with its save and restore chambers settings features.

See VersaTenn V AppNote 8 - VTV Simple Comm Rev 4 (pdf 168k) or video  for more information.;


Version 4.5.3
SimpleCommV4.5.3Setup.zip (6M)

The SimpleComm Visual Basic source code is available for users who would like to modify it or develop their own communications programs. Note: The VTV SimpleComm VisualBasic application requires the "T&MW Instrument I/O Control" component which is installed separately (included in this zip file). To install the T&MW Control, open the "TMWmagGPIBActivex.ZIP" file and run the "Setup.exe".



Version 4.5.3
SimpleCommVBSource4.3.0.zip (2.4M)


  Synergy Manager

 

For applications requiring the control and monitoring of multiple and diverse environmental chambers, Tidalís Synergy Manager Software supports numerous controllers in any combination. The Synergy Manager is available in a free Monitor-only Mode.  The Monitor-only Mode does not allow remote control of your chambers, it only monitors and reports the current chamber conditions.  Additionally, you can create chamber profiles, but cannot download them, logging is limited to 6,500 records, and the alert system will display alarms, but will neither email nor fax them.  Visit the Synergy Manager page for more detailed information on the Synergy Manager and the differences between the Monitor-only Mode and Full Feature Mode. Contact Tidal Engineering to purchase a dongle to enable Full Featured Mode. 


Version 2.16.00 For Windows XP, Windows 7, Windows 8.1 and Windows 10 (Current Version)

SynergyMan_Setup_2_16_00.zip(72.6M)


Version 2.13.01 For Windows 7 and Windows XP (Previous Version)
SynergyMan_Setup_2_13_01.zip (58M)
Synergy Manager Installation Notes for Win7


Version 2.12.21 For Windows XP (Prior Version)
SynergyMan_Setup_2_12_21_Setup.zip (72M)



  Labview Drivers  

LabVIEW 8.0 Multi-protocol LabVIEW drivers for the VersaTenn and Synergy environmental test chamber controllers. Supports National Instrumentsí latest LabVIEW versions (8.00 and 8.2). Engineered to work with the controllersí built-in Ethernet-TCP/IP, GPIB and RS-232 communications capabilities, the new driver is designed to speed development of temperature, humidity and altitude test programs.


Labview 8.0 drivers
TESynC_1_1.llb (600k)



Labview 5.0 (GPIB only)
VersaTennv03.llb (1M)



Labview 5.0 Technical Manual
VTV_LabVIEW_Driver_Manual.pdf (600k)