The new SBC488E(thernet) features Ethernet connectivity together with a IEEE 488 / General Purpose Interface Bus (GPIB) controller. The new board, which packs a TCP/IP stack, is a swap-in replacement for Tidal’s legacy SBC488A as it too is fully supported by Z-World’s Dynamic C Premier^TM development system, and measures the same 6.5” x 4.0” compact size.

For more detailed information, see the index at the bottom of this page or view a comparison of the SBC488E, SBC488A and SBC488 features.  

SBC488A Single Board Computer

The SBC488A programmable single board computer has a modular I/O system with a range of plugable A/D, D/A and digital I/O modules. 

For more detailed information, see the index at the bottom of this page or view a comparison of the SBC488E, SBC488A and SBC488 features.   

SBC488 Single Board Computer

The SBC488 operates from 115 VAC and offers up to six 12-bit D/A analog outputs, eleven 12-bit A/D capacity and 32 bi-directional digital I/Os.

For more detailed information, see the index at the bottom of this page or view a comparison of the SBC488E, SBC488A and SBC488 features.    

For more detailed information see the index at the bottom of this page. 

ADAIO I²C Analog/Digital IO Modules

Compact and versatile, these microcontroller-based devices provide both analog input and output and employ the I²C Bus (Inter-Integrated Circuit). Compatible with Tidal’s SBC488A and SBC485A product lines, these devices provide modular analog input and output expansion. Fully isolated with optically isolated data and isolated power, these ADAIO modules are equally suitable as standalone devices in a wide range of data acquisition and measurement applications including signal measurement and process control. 

ADAIO module are available in a range of resolutions and typically can be configured for full scale ranges from 1.0 VDC to 10 VDC. Standard models are listed below: